Command Line Interface 81
Commands
Examples
To view the current software version of all IPDUs in a daisy chain, type:
Note: If an IPDU has an id assigned to it, the ver command displays the word “id”
followed by the name of the IPDU; however, if no id is configured for the
IDPU, the ver command displays the word “id” without a name following it.
To get this information for a specific unit, provide the unit number as an
argument.
whoami
Shows the username of the user currently logged in.
Syntax
whoami
Arguments
N/A
pm>ver
IPDU #1: Hw with 8 outlets 20 AMPs max Sw V
1.7.1 Oct 4, 2005 id RDservers
IPDU #2: Hw with 10 outlets 10 AMPs max Sw
V 1.7.1 Oct 4, 2005 id
pm>ver 2
IPDU #2: Hw with 10 outlets 10 AMPs max Sw
V 1.7.1 Oct 4, 2005 id
To Next Page
Loading...