Commands
70 AlterPath PM Installation, Administration, and User’s Guide
on
Turns an outlet or a group of outlets on. If more than one outlet is selected
there will be an interval between outlets being powered on, the interval is
defined by the
interval command.
Syntax
on all|<outlet number>
Arguments
all Turns off all outlets
<outlet number> Outlet number, such as “5”, outlet name such as
“sunfire”, or group of outlets such as “1, 3-5”.
Examples
To turn on outlets 1, 3, 4, and 5, type:
passwd
Sets a password. The Administrator has a default password (pm8), which can
be changed. Regular users can change or set only their own password. The
Administrator can change his or her own password or any regular user’s
password.
Syntax
passwd <newpassword>
pm>on 1, 3-5
1: Outlet turned on.
3: Outlet turned on.
4: Outlet turned on.
5: Outlet turned on.
To Next Page
Loading...