Command Line Interface 53
Commands
adduser
Adds one username to the internal database. A maximum of eight characters
(not case sensitive) is allowed, and a maximum of eight individual users is
allowed. This command is available to the admin user only.
Syntax
adduser <user>
Arguments
<user> Desired username
Examples
alarm
Sets and reads the current threshold.This command is available to
administrator only.
Syntax
alarm <IPDU#> <threshold>
Arguments
<IPDU#> IPDU number in a daisy chain
<threshold> The current threshold is the maximum allowed
current on the power strip
pm>adduser popper
Password:
Re-enter password:
Username/password set for user popper.
pm>
To Next Page
Loading...