Commands
78 AlterPath PM Installation, Administration, and User’s Guide
temperature
This command displays the AlterPath PM unit’s surrounding temperature and
the maximum temperature the unit has registered (temperature peak). It can
also be used to clear the saved peak temperature value.
Syntax
temperature <IPDU#>|reset
Arguments
<IPDU#> IPDU number in a daisy chain
reset Resets the maximum temperature registered
Examples
To get the temperature for all units in a daisy chain, type:
To get the temperature for specific unit, provide the unit number as an
argument, type:
pm> temperature
IPDU #1: Temperature: 36.1°C (96.9°F). Maximum:
36.1°C (96.9°F).
IPDU #2: Temperature: 20.0°C (68.0°F). Maximum:
25.0°C (77.0°F).
pm> temperature 2
IPDU #2: Temperature: 20.0°C (68.0°F). Maximum:
25.0°C (77.0°F)
To Next Page
Loading...