Command Line Interface 67
Commands
lock
Locks an outlet or group of outlets in the current state. The response to this
command is a list of status lines, one per power port.
Syntax
lock <outlet number>
Arguments
<outlet number> Outlet number, such as “5”, outlet name such as
“sunfire”, or group of outlets such as “1, 3-5”
Examples
To lock outlets 1, 2, and 6, type:
name
Names an outlet. A maximum of 16 alphabetic and numeric characters (not
case sensitive) is allowed with these exceptions:
• The hyphen (-), percent (%), and comma (,) characters are not allowed.
• Numeric characters are not allowed as the first character of a name.
This command is available to the administrator user only.
Syntax
name <outlet number> <name>
pm>lock 2,6,1
1: Outlet locked.
2: Outlet locked.
6: Outlet locked.
To Next Page
Loading...