Safety Instructions
98 AlterPath PM Installation, Administration, and User’s Guide
Safety Instructions
Read all the following safety guidelines to protect yourself and your AlterPath
PM.
DANGER! All outlets of the AlterPath PM output high voltage. Necessary precautions
should be taken.
DANGER! To help prevent electric shock, plug the AlterPath PM into a properly
grounded power source. The power cord is equipped with a three-prong plug
to help ensure proper grounding. Do not use adapter plugs or remove the
grounding prong from the cable. Do not use extension cords with the
AlterPath PM.
DANGER! Do not push any objects through the openings of the AlterPath PM. Doing so
can cause fire or electric shock by shorting out interior components.
DANGER! There is a possibility of live feed for either Line or Neutral even if one of the
circuit breakers is disabled.
Important: AlterPath PM is intended for enterprise and indoor use only.
Important: To help protect the AlterPath PM from electrical power fluctuations, use a
surge suppressor, line conditioner, or uninterruptible power supply.
Important: Be sure that nothing rests on the cables of the AlterPath PM and that they are
not located where they can be stepped on or tripped over.
Important: Do not spill food or liquids on the AlterPath PM. If it gets wet, disconnect the
power immediately and contact Cyclades.
To Next Page
Loading...