Commands
54 AlterPath PM Installation, Administration, and User’s Guide
Examples
To set the threshold, type:
To read the threshold of a single unit, type:
assign
Assigns an outlet to a given user. The user is then be able to manage such
outlets. This command is available to the administrator user only.
Syntax
assign <outlet number> <user>
Arguments
<outlet number> Outlet number, such as “5”, outlet name such as
“sunfire”, or group of outlets such as “1, 3-5”
<user> Desired username
pm>alarm 1 5.6
Setting alarm threshold on IPDU #1 to 5.6A
pm>alarm 2 7.8
Setting alarm threshold on IPDU #2 to 7.8A
pm>alarm
Alarm threshold on IPDU #1 is 5.6A
Alarm threshold on IPDU #2 is 7.8A
To Next Page
Loading...