Command Line Interface 55
Commands
Examples
To assign outlet 4, 6, 7, and 8 to user tess, type:
buzzer status
Displays or changes the buzzer notification status. A buzzer may when there
is an overcurrent situation.
Syntax
buzzer status <status|on|off>
Arguments
status Displays the buzzer status
on Enables buzzer
off Disables buzzer
Examples
To get the current status of the buzzer notification, type:
pm>assign 4, 6-8 tess
4: Outlet assigned to tess.
6: Outlet assigned to tess.
7: Outlet assigned to tess.
8: Outlet assigned to tess.
pm>buzzer status
Buzzer is ON on IPDU #1
Buzzer is ON on IPDU #2
To Next Page
Loading...