Cyclades alterpath pm8 - To Assign Outlets to Users Using the Assign Command; To Name the Outlets Using the Name Command; To Save the Configuration Using the Save Command

Initial Configuration Using the Command Prompt
40 AlterPath PM Installation, Administration, and User’s Guide
T To Assign Outlets to Users Using the assign
Command
1. Login to the AlterPath PM.
The PM prompt appears.
2. Enter the
assign command followed by the outlets and username.
T To Name the Outlets Using the name
Command
1. Login to the AlterPath PM.
The PM prompt appears.
2. Enter the
name command followed by the outlet number and desired
name of the outlet.
T To Save the Configuration Using the save
Command
1. Login to the AlterPath PM.
The PM prompt appears.
pm>
pm>assign 2 jane
Outlet 2 assigned to jane.
pm>
pm>name 2 chispa
2: Outlet now named chispa
pm>