Cyclades alterpath pm8 - Page 64

Upgrading the AlterPath PM Firmware
44 AlterPath PM Installation, Administration, and User’s Guide
After the upgrade command is executed, the boot loader menu is
displayed at the console, as shown below:
3. At the boot loader menu, select the option 1 to upgrade the firmware.
The boot loader erases the firmware currently in the unit and asks you to
upload the new firmware, as shown below:
AlterPath PM
Copyright (c) 2002-2005 Cyclades
Corporation
V 1.7.0 Sep 15, 2005
Username: admin
Password:
pm>upgrade 1
-----------------------------
Copyright (c) 2003 Cyclades Corporation
AlterPath PM/KVM Boot Loader Version 1.1
-----------------------------
Boot Menu
1. Upgrade Firmware.
2. Boot Firmware.
-----------------------------
Enter choice (1 or 2):
-----------------------------
Copyright (c) 2003 Cyclades Corporation
AlterPath PM/KVM Boot Loader Version 1.1
-----------------------------
Boot Menu
1. Upgrade Firmware.
2. Boot Firmware.
-----------------------------
Enter choice (1 or 2): 1
Erasing firmware...done.
Downloading image. Please send file in 10
seconds.