Command Line Interface 51
PM User Interface
After the “Username:” prompt, enter your username.
After the “
Password:” prompt, enter the password for the unsername
entered.
The default user is admin with password “pm8”.
After a successful login, the PM command prompt appears after which you
can use any of the commands described in “Commands” on page 52.
After logging in, the administrator can choose to change his or her password
through the passwd command (seen later). Passwords can be set to null, which
indicates that no password is needed.
To know all the commands supported by the PM, review the following
sections or type the
help command.
AlterPath PM
Copyright (c) 2002-2005 Cyclades
Corporation
V 1.7.1 Oct 4, 2005
[PM]: IPDU: 1
[PM]: OUT: 8
Username: admin
Password:
pm>
To Next Page
Loading...