9D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 2 - Installation
1. Turn o and unplug your DSL broadband modem. This is required.
Hardware Installation
2. Position your router close to your modem and a computer. Place the router in an open area of your intended
work area for better wireless coverage.
3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer.
Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer.
Modem
PC
10/100 BASE-TX Cable
To Next Page
Loading...
Need help?
General
