21D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
Wireless security helps to prevent unauthorized users from accessing your wireless network, or seeing data being passed
between the router and wireless clients. The DSL-2750B supports two popular wireless security protocols, you should select a
protocol based on the wireless clients which will be accessing your network.
Wired Equivalent Privacy (WEP) - This is an older form of wireless security and should only be used if your wireless clients do
not support the newer WPA or WPA2 protocols.
2.4G Wireless Security
Wi-Fi Protected Access (WPA/WPA2) - This is a newer and more secure protocol for wireless security. It uses a cipher combined
with a pre-shared key (password) to encrypt data being sent over the wireless network. It is recommended that you use this
security method if it is supported by your wireless clients.
Wireless
Security
Mode:
Select a wireless security encryption option. You can also
choose to not use one by selecting None, but this is not
recommended.
WPA Mode:
Choose Personal or Enterprise.
Encryption
Mode:
Select TKIP + AES.
Group Key
Update
Interval:
Enter the time in seconds that the group key will be
automatically updated.
Pre-Shared
Key:
Enter a string of 8 characters to set a password for your wireless
network.
RADIUS server
IP Address:
For Enterprise mode, enter the IP address of your network’s
RADIUS server here.
RADIUS server
Port:
Enter the port of your network’s RADIUS server here.
RADIUS server
Shared Secret:
Enter the password of your network’s RADIUS server here.
To Next Page
Loading...
Need help?
General
