80D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
Traceroute
Protocol: Select IPv4 or IPv6 to run the test on.
Host: Enter a host to run a traceroute against.
Max TTL: Enter a maximum value for TTL.
Wait times: Enter a maximum value for wait times between hops.
Result: The results of the traceroute test will be displayed here.
The Traceroute section enables you to run a traceroute test. Congure
your settings and click Traceroute to run the test.
To Next Page
Loading...
