D-Link DSL-2750 - Share Protection

53D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
Share Protection
IPID: Check to enable IPID conguration.
TTL: Check to enable TTL for IPID settings.
TTL Value: Enter a TTL value.
Connlimit: Check to enable concurrent connections limit.
TCP
Connlimit
Value:
Enter a value for the TCP concurrent connections limit.
UDP
Connlimit
Value:
Enter a value for the UDP concurrent connections limit.
The identication eld is used to distinguish the fragments of one
datagram from those of another. The originating protocol module
of an internet datagram sets the identication eld to a value that
must be unique for that source-destination pair and protocol for the
time the datagram will be active in the internet system.