D-Link DSL-2750 - USB Setup

25D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
USB Setup
The DSL router comes with a USB 2.0 interface which you can connect
a USB printer, a USB storage device (e.g. USB disk / USB external hard
disk) or a USB 3G modem.
To congure the USB device on the router, click USB Setup in the
SETUP tab. The router can be congured as a USB network le server
when you plug-in a USB storage device. It can also be congured as
a USB printer server when you plug- in a USB Printer device. Lastly,
it can connect to Internet via 3G network when you plug-in a USB
3G USB Modem.
SAMBA Server:
If you have connected a USB storage device to be used as a
media server, clicking Setup here will take you to SAMBA on
page 39.
FTP Server:
If you have connected a USB storage device to be used as a
le server, clicking Setup here will take you to FTP on page 35.
USB WAN Setup:
If you have connected a 3G USB modem, clicking Setup here
will take you to 3G WAN Conguration on page 40.