D-Link DSL-2750 - Local Ipv6 Network

24D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
Local IPv6 Network
This section enables you to specify various IPv6 settings.
IPv6 Address:
Use this option to specify a static IPv6 Address.
Enable RADVD:
Enable or disable the Router Advertisement Daemon.
Enable DHCPv6
Server:
Enable or disable the DHCPv6 server function.
Lan Address
Cong Mode:
Select either stateless (host requests) or stateful (server
provisions) LAN IPv6 addressing.
Start/End
Interface ID:
Enter the range of IP addresses the DHCPv6 server can issue
from.
DHCPv6 Lease
Time:
The lease time determines the period that the host retains the
assigned IP addresses before the IP addresses change.
DHCPv6 Valid
Time:
Specify the period for which an assigned IPv6 address remains
valid.
IPv6 DNS Mode:
Allow the router to accept the first received IPv6 DNS
assignment from a WAN connection. Alternatively, you can
manually enter the IP addresses for primary and secondary
IPv6 DNS servers.
WAN Interface:
Specify the WAN interface to be used.
Primary DNS:
Enter an address for a preferred DNS server.
Secondary DNS:
Enter an address for an alternate DNS server.
Get Prex Mode:
Use this option to specify whether IPv6 prex delegation is
assigned manually or via a WAN interface.
WAN Interface:
Specify the WAN interface to be used. for IPv6 prex delegation.
Site Prex:
Manually assign an IPv6 prex delegation.