31D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
MAC Filtering
The Access Control setup tab enables you to congure lters to
control which wireless clients can access your network, and which
network resources they can access.
Select Enable to enable the Wireless Access Control Mode. In this
mode, only listed wireless devices will be allowed to connect to the
wireless network. Click Submit to save your settings.
Click the Add button to add an item to the lter list.
Enter the MAC address of a device you wish to allow access for to
the WLAN.
Click the Apply button when you are done. This will add the device’s
MAC address to the lter list.
To Next Page
Loading...
Need help?
General
