D-Link DSL-2750 - Port Trigger

37D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
Port Trigger
Port triggering allows ports to be opened for remote access if
triggered by activity by a local computer on specied ports.
Click Add, Edit, or Delete to reveal the Port Trigger setup options.
Enable Port
Trigger:
Check this to enable the port trigger feature.
Service
Name:
Enter a name for the server or service.
Rule Status: Select whether to Enable or Disable this rule.
Trigger Port
Start/End:
Enter the starting and ending port to monitor to trigger this
rule.
Trigger
Protocol:
Select the protocol to monitor for to trigger this rule.
Open Port
Start/End:
Enter the starting and ending port to open when the rule is
triggered.
Open
Protocol:
Enter the protocol to allow through the opened ports.