81D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
Ping
Protocol: Select IPv4 or IPv6 to use for the ping test.
Host: Enter a host to ping.
Number of
retries:
Enter a value for the number of times you would like to ping
the host.
Timeout: Enter a timeout value before a failure is declared.
Packet Size: Enter a value for the ping packet size.
WAN
Connection:
Select a WAN connection from the drop-down menu to use
for the ping test.
Result: The results of the ping test will be displayed here.
The Ping section enables you to run a ping test.
To Next Page
Loading...
