20D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
On this page the user can congure the Wireless settings for this device. There are 2 options to congure 2.4G Wireless Settings.
Firstly, the user can choose to make use of the Wireless Basic settings. Secondly, the user can choose to make use Wireless
Security settings.
2.4G Wireless
Click the Wireless Basic button to view the basic wireless
conguration options .
Enable
Wireless:
Choose to enable or disable the wireless networks.
AP Isolate:
Choose to enable or disable wireless isolation.
SSID:
Enter an SSID for the wireless network.
Visibility
Status:
Choose to enable SSID broadcast so other wireless devices can
nd the network.
Continent/
Country:
Depending on what country the router is used in, regulations
provide for the router to automatically set the transmit power
and frequencies that may be used in that country.
802.11 Mode:
Select from the drop-down menu the mode of operation you
require.
Bandwidth:
Use the drop-down menu to select the channel bandwidth.
Wireless
Channel:
Use the drop-down menu to select a wireless channel, or let
the router scan automatically.