D-Link DSL-2750 - Page 23

19D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
Sustainable
Cell Rate:
Sustainable cell rate (SCR) is the maximum rate that trac can
pass over PVC without the risk of cell loss.
Maximum
Burst Size:
Maximum burst size (MBS) is the maximum
number of cells that can be transmitted at the PCR.
Protocol:
Select the appropriate protocol from the drop-down menu. You
can choose between PPPoE/PPPoA, MER, IPoA, or Bridging. The
conguration options will change accordingly.
Encapsulation
Mode:
You can select LLC or VCMUX. In this example, the encapsulation
mode is set to LLC.
802.1Q VLAN
ID:
Select this option to Activate/Deactivate the 4094 VID on the 4
dierent queues. VID (VLAN ID) is the identication of the VLAN,
which is basically used by the standard 802.1Q. It has 12 bits
and allows the identication of 4096 (2^12) VLANs. Of the 4096
possible VIDs, a VID of 0 is used to identify priority frames and
value 4095 (FFF) is reserved, so the maximum possible VLAN
congurations are 4,094
Enable
Service:
Choose to enable or disable the service.
Firewall
Enable:
Choose to enable or disable the rewall.
Service Name:
Enter a name for the service.
Click Apply to save your Internet Setup settings.