D-Link DSL-2750 - Internet Connection Setup

13D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual
Section 3 - Conguration
This section of the wizard enables you to congure your Internet
connection type. Select the appropriate wan connection type which
is provided by your ISP.
If the router detected or you selected PPPoE or PPPoA, enter your
PPPoE/PPPoA username and password and click Next to continue.
Note: Make sure to remove your PPPoE software from your computer.
The software is no longer needed and will not work through a router.
If the router detected or you selected Static IP, enter your Static IP
information as supplied by your ISP. Click Next to continue.
If the router detected or you selected Bridge or Dynamic IP, click
Next to continue.