DAELIM S2 250

10-6
CYLINDER HEAD / VALVE
● Inspect each valve for bending, burning, scratches or
abnormal stem wear.
● Check valve movenment in the guide.
● Measure each valve stem O.D.
SERVICE LIMITS:
IN : 4.925mm replace if below
EX : 4.925mm replace if below
ASSEMBLY
● Install the valve spring seats and stem seals.
● Lubricate each valve stem with engine oil and insert
the valves into the valve guides.
● Tap the valve stems gently with a plastic hammer to
firmly seat the cotters.
INSTALLATION
● Install the cam chain guide.
● Install the dowel pins and a new cylinder head gasket.
·Be careful not to damage the valves.
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
PLASTIC HAMMER
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD
CYLINDER HEAD