EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Removal and installation 95XF series
4-30
Note:
If the bearings are removed from both
wheels, the bearings should be marked.
Each bearing should be re-installed in its
original hub.
9. Remove the hub with the wheel from the
axle journal.
10. Remove the hub seal (14).
11. Remove the inner wheel bearing (13) from
the hub.
12. Remove the grease f rom the hub and clean
it.
13. Clean the bearings.
14. Remove the outer races of t he wheel
bearings, if necessary.
5
200424
To Next Page
Loading...
