DAF 95XF - Page 154

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Removal and installation 95XF series
4-34
S7 00 180
A B C D E
1 2 3
F
H
G4
I K L
Installing the hub oil seal
1. Check the seal chamber (4) i n the hub (2)
for damage.
2. For the installation of the hub oil seal (4)
use s pecial tool (DAF no. 1240036).
3. Assemble the special tool: turn the
threaded ends (A) and (L) into the centring
spindle (E). Assemble the short stud (L) on
the s ide where the pin is located in the
centring s pindle (E).
4. Slide the appropriate centring flange (F)
over the centring spindle (E).
5. Install the inner wheel bearing (3). Slide the
centring s pindle (E) with the centring flange
(F) into the hub (2).
6. Press the centring flange (F) into the inner
wheel bearing (3).
5
 200424