DAF DAVIE XDc II User Manual

9-4
©
200706
DAVIE XDc II
VCI Configuration Manager
Status Info
VCI Serial Number This shows the VCI serial number which is
connected to the DAVIE XDc II. The
information is only available if the VCI is
connected by USB.
VCI MAC address This is an address that is required for every
port or device that connects to a network. Use
these addresses to locate specific ports in the
network. The information is only available if the
VCI is connected by USB.
VCI Firmware Version The version number of the VCI currently
connected. The information is only available if
the VCI is connected by USB.
Tester Firmware Version This shows the version of the VCI firmware
which is installed on the DAVIE XDc II.
Tester Software Bundle This shows the version of the VCI Software
which is installed on the DAVIE XDc II.
Connection Status This shows the connection status between the
DAVIE XDc II and the VCI.
Connection type This shows the connection type of the VCI.
This must be USB, WLAN or ---. The dash (---
) will be displayed when the VCI is not
connected.
Network name (SSID) The Network name (SSID) for the WLAN
Connection that is currently configured on the
VCI.
Save Report File Press this button to generate a report file which
could be used for support from the helpdesk or
to archive the current settings.
OK The VCI Configuration Manager closes
automatically. If changes are made in other
screens these changes will be set.
Cancel The VCI Configuration Manager will close
without any changes
NOTE
If pressed OK, a confirmation screen is displayed.
VCI and Tester settings will be overwritten !
Be sure that "Windows automatic wireless network configuration" is enabled.
See the User manual for more information.
Normally the "Windows automatic wireless network configuration" are already
been set at delevery. These settings must be dona only after a complete
reinstallation of Windows XP.

DAF DAVIE XDc II Specifications

General

Brand	DAF
Model	DAVIE XDc II
Category	Test Equipment
Language	English