DAF DAVIE XDc II User Manual

©
200706 5-7
Vehicle Identification
DAVIE XDc II
5.4 Deselect ECU Installation Variant
After the automatic or manual variant selection is finished, DAVIE XDc II
displays the Direct Test or Guided Diagnosis screen.
If a system needs to be deselected, use the "Go to" button and select "ECU
Installation Variants".
Figure 5-8 System variant list (deselected Variant)
The variant names are displayed. Now it is possible to deselect and reselect
systems and variants from the list.
A selected system is marked by a black bar, a deselected system is marked by
"
!" and a highlighted bar. The """ is only visible if you select or deselect the
variants manually.
NOTE
Deselecting automatically selected variants should be avoided. The use of an
incorrect variant has a direct influence on the proposal of test procedures.
A selection of a variant different to the proposed variant is only necessary if the
installation variant is definitively changed in the workshop and the Parts Rapido
Subset database or the central truck ECU is not already updated.
The system continues with the "Forward / >" button.
A list with the systems, selected in the "ECU Installation Variant" screen, will be
displayed.

DAF DAVIE XDc II Specifications

General

Brand	DAF
Model	DAVIE XDc II
Category	Test Equipment
Language	English