9-6
©
200706
DAVIE XDc II
VCI Configuration Manager
Basic Setup
Network Adapter Choose the Wireless Network Adapter that has
to be used to communicate with the VCI.
Normally the internal Wireless Network
Adapter of the DAVIE XDc II is pre selected.
The internal Wireless Network Adapter is
prefered.
Network Name (SSID) The default Network Name is VCI-01. This is
the default network name between the DAVIE
XDc II and the VCI.
OK The settings will be changed in the VCI and
DAVIE XDc II and the Configuration Manager
closes automatically.
Cancel The VCI Configuration Manager will close
without any changes
NOTE
The network name must be unique. If other VCI's or Wireless Networks nearby
are using the same name, change the network name.
The Network name (SSID) will be stored in the VCI and on the local Wireless
Network Adapter which was selected above.
NOTE
The configuration is automatically created and applied to the VCI and DAVIE
XDc II.
The "Basic Setup" sets a WEP-key secured network connection between VCI
and the DAVIE XDc II.
9.2.3 Advanced Setup
NOTE
The "Advanced Setup" only configures the VCI settings. Configuration of the
DAVIE XDc II must be set using programs provided by Windows or the
manufacturer of your WLAN network adapter hardware.
Therefore only use the Advanced Setup when you have knowledge about
Windows XP and wireless network settings.
Only the VCI configurations are displayed and are read at the start-up of the VCI
Configuration Manager.
To Next Page
Loading...
Need help?
General