DAF DAVIE XDc II User Manual

©
200706 5-1
Vehicle Identification
DAVIE XDc II
5 VEHICLE IDENTIFICATION
The DAVIE XDc II has two options for identifying a vehicle and the used
systems.
• Automatic vehicle identification
• Manual vehicle identification
The automatic vehicle identification from the truck chassis number and the
"Parts Rapido Subset" database is usually used. This ensures that the
assignment of the test procedures corresponds to the vehicle configuration.
If automatic identification from the truck chassis number is not possible, manual
identification can be carried out.
NOTE
The complete vehicle configuration is saved in the log file.
5.1 Start of Diagnostic Session
If a diagnostic Session is started (Direct Test or Guided Giagnosis),
DAVIE XDc II checks the communication to the Vehicle Communication
Interface. After the communication check, the vehicle identification will be
started.
When the communication is unsuccessful the DAVIE XDc II displays a
message.
Figure 5-1 Communication verification message

DAF DAVIE XDc II Specifications

General

Brand	DAF
Model	DAVIE XDc II
Category	Test Equipment
Language	English