DAF DAVIE XDc II User Manual

6-8
©
200706
DAVIE XDc II
Direct Testing
6.5.1 EXIT
This option exits the current test, ends the diagnostic session, and displays the
DAVIE XDc II start screen Figure 6-1.
Figure 6-9 Warning : Exit operation mode
6.5.2 Health Check
The option "Health Check" is only displayed within the "Go To" button in the
"ECU Installation Variants" and "Direct Test Selection" menu if an ECU is
selected.
This option reads all pending (active) fault codes within the system of all
selected ECU's in the "ECU Installation Variants" screen.
A "Health Check" is often the first test that is performed because the results
provide important diagnostic information that can guide further diagnostic
testing.
6.5.3 Fault Memory Contents
All faults which have been detected with the "Health Check" can be read out in
the "Fault Memory Contents".
These fault codes are very important for the user because almost every ECU is
capable of self-diagnosis and checks the sub-systems connected to the ECU.
This information allows the user to concentrate on the specific fault areas in the
vehicle.
The results of the "Fault Memory Contents" will be saved into the log file.

DAF DAVIE XDc II Specifications

General

Brand	DAF
Model	DAVIE XDc II
Category	Test Equipment
Language	English