©
200706 7-3
Guided Diagnosis
DAVIE XDc II
7.4 Guided Entry
There two different main methods to build a test plan to solve the problem on
the truck.
Guided entry with:
• Fault codes (present in the ECU Fault Memory)
• Symptom (deviant behaviour of the truck)
Select the entry you want to use and it turns press the "Forward / >" button
Figure 7-2 Guided Entry
7.5 Guided entry with Fault code(s)
This method uses the fault codes, present in the ECU Fault Memory, to
determine which elements are suspected to be defective.
To read out all Fault codes, press the "Guided entry with Fault codes" in the
"Guided Diagnosis Entry" screen. After this selection the "Health Check" is
started automatically.
To Next Page
Loading...
Need help?
General