DAF DAVIE XDc II User Manual

11-8
©
200706
DAVIE XDc II
Troubleshooting
11.4.3 Wireless Communication recovery
The DAVIE XDc II communicates with the ECU's installed in the truck via the
truck side "Diagnostic Connector" by using a special communication interface,
called the Vehicle Communication Interface (VCI). The VCI switches the input
channel automatically to the required data line (K-line, L-line) or CAN-bus of the
truck side "Diagnostic Connector".
The DAVIE XDc II provides two options for the communication between VCI
and DAVIE XDc II, radio and USB communication.
The safest way to change the communication is to close the DAVIE XDc II
program and connect or disconnect the USB-cable.
If an error message about the WLAN appears after this self-test, carry out the
following actions
1. Connect the USB cable between the VCI and the DAVIE XDc II.
2. Connect the VCI with the Vehicle Diagnostic Cable to the vehicle.
3. Open the "VCI Configuration Manager" by the shortcut in the Windows
Start menu or double-click the VCI Tray Icon in the System Tray (See also
chapter "VCI Configuration Manager").
4. The unique network name (SSID) is displayed in the "Status Info" screen.
5. Go to the "Basis Setup" screen.
6. Change the "Network Name (SSID) to a desired unique name which is not
used nearby. For Example: VCI-02. Only use alpha numeric symbols. For
example 1, 2, ect. and a, b, c, ect. Do not use: ! @ # $ % ^ & * ( ).
7. Press "OK" to apply the setting. The settings will be changed in the VCI and
DAVIE XDc II.
8. VCI Configuration Manager is closed automatically.
9. Open the "VCI Configuration Manager" and select the "Common Settings"
screen.
10.Press "Selftest" and follow the instructions on the screen.
11.If still an error message about the WLAN appears, refer the error list.
If the problem can not be solved, contact the Local helpdesk
Before contacting the Helpdesk, please have the following information ready:
1. Laptop type and Serial No.
2. VCI type and Serial No.
3. Used or installed Runtime version ( e.g. V5.3.0).
4. Used or installed Application data (e.g. V29.02).
5. Used or installed Parts Rapido Subset (e.g. V02.52).
6. If a failure message appears, create a "report file" in the "VCI configuration
Manager".
7. Report file of the VCI configuration manager.

DAF DAVIE XDc II Specifications

General

Brand	DAF
Model	DAVIE XDc II
Category	Test Equipment
Language	English