To Next Page

To Previous Page

11-6

200706

DAVIE XDc II

Troubleshooting

Detailed information is available in the report file. This will be generated after a

"Selftest" sequence.

The "Selftest" procedure is separated into two parts.

1. The VCI hardware will be tested.

2. The wireless communication between DAVIE XDc II and VCI will be

checked.

NOTE

For the wireless communication test, the USB connection has to be removed

and a working WLAN-profile on the DAVIE XDc II and the matching settings on

VCI are assumed. Refer to chapter "VCI Configuration manager".

Before using the "VCI Configuration Manager" to carry out the self-test for the

Vehicle Communication Interface, close the DAVIE XDc II program.

If there is a WLAN error, please refer the error list. For detailed instructions how

to carry out the self-test, refer to Chapter "Configuration Manager".

Before contacting the local Helpdesk, please have the following information

ready:

1. Laptop type and Serial No.

2. VCI type and Serial No.

3. Used or installed Runtime version (e.g. V5.3.0)

4. Used or installed Application data (e.g. V29.02)

5. Used or installed Parts Rapido Subset (e.g. V02.52)

6. If a failure message appears, make a screenshot or write down the text or

numbers of the message.

7. Report file of the VCI configuration manager.

11.4.2 VCI Configuration Manager Self-test error list

Test Item Value Meaning Action

SRAM 00 OK No action needed

01 Not OK Contact the local

helpdesk

EEPROM 00 OK No action needed

01 Not OK Contact the local

helpdesk

DAF DAVIE XDc II User Manual

Other manuals for DAF DAVIE XDc II