Dahua DH-XVR1B08 User Manual

Local Configurations 119
Figure 5-78
Select the uninitialized device that you want to initialize. Step 3
Click Initialize. Step 4
The Enter Password interface is displayed. See Figure 5-79.
Figure 5-79
Configure the password and email information. Step 5
If you select the Using current device password and email info check box, the
remote device automatically uses the current password and email information, so you
do not need to set the password and email address again and can go to Step 6.
Clear the Using current device password and email info check box. 1)
The password setting interface is displayed. See Figure 5-80.

Dahua DH-XVR1B08 Specifications

General

Audio Input	1 channel, RCA
Audio Output	1 channel, RCA
Video Output	1 HDMI, 1 VGA
USB	2 USB 2.0 ports
Power Supply	DC12V/1.5A
Video Compression	H.265/H.264
Analog Camera Input	8 channels, BNC
IP Camera Input	8
HDD	1 SATA port, up to 6TB
Network	1 RJ-45 port (10/100 Mbps)
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Max Recording Resolution	1080N/720p/960H/D1/CIF