Local Configurations 142
This area includes Mark List and File List.
: Click the Mark List button, the marked recorded video
list is displayed. Double-click the file to start playing.
: Click the File List button, the searched recorded video
list is displayed. You can lock the files. For details, see "5.9.8
Using the File List."
Click to display in full screen. In the full screen mode, point to
the bottom of the screen, the time bar is displayed. Right-click on
the screen to exit full screen mode.
You can select 24hr, 2hr, 1hr, or 30min as the unit of time bar. The
time bar display changes with the setting.
Table 5-33
5.9.3.1 Introducing Playback Controls Bar
You can perform the operations such as control the speed of playback, add mark, and take
snapshots through the playback controls bar. See Figure 5-104 and Table 5-34.
Figure 5-104
The play backward function and playback speed are dependent on the product version. The
actual product shall govern. You can also contact the technical support to consult the hardware
version information.
Play/Pause.
During playing back, you can switch between play and pause.
Stop.
During playing back, you can click the Stop button to stop playback.
To Next Page
Loading...
Need help?
General
