Dahua DH-XVR1B08 User Manual

Local Configurations 232
Figure 5-196
Configure the settings for the backup parameters. See Table 5-58. Step 2
Parameter
Description
Device Name
In the Device Name list, select the device that you want to back up
the files to.
Format
Click Format, the Format interface is displayed.
If the capacity of external storage device is less than 2TB, you

can select FAT32 or NTFS to format it.
If the capacity of external storage device is equal to or more

than 2TB, you can only select NTFS to format it.
Path
Click Browse, the Browse interface is displayed. Select the route
where you want to search for the files.
Record CH
In the Record CH list, select the channel where you want to search
for the files.
Type
In the Type list, select the file type that you want to search.
Start Time
Enter the start time and end time for the files that you want to
search.
End Time
File Format
In the File Format list, select the file format as DAV or MP4 that
you want to search.
Table 5-58
Click Search to search the files that meet the configured settings. Step 3
The searched results will display in the table.
Select the files that you want to back up. Step 4
Click Backup to back up the selected files to the configured path. Step 5

Dahua DH-XVR1B08 Specifications

General

Audio Input	1 channel, RCA
Audio Output	1 channel, RCA
Video Output	1 HDMI, 1 VGA
USB	2 USB 2.0 ports
Power Supply	DC12V/1.5A
Video Compression	H.265/H.264
Analog Camera Input	8 channels, BNC
IP Camera Input	8
HDD	1 SATA port, up to 6TB
Network	1 RJ-45 port (10/100 Mbps)
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Max Recording Resolution	1080N/720p/960H/D1/CIF