Local Basic Operation 114
2) Configure parameters. See Table 4-10.
Table 4-10
The new password can be set from 8 characters through 32
characters and contains at least two types from number, letter and
special characters (excluding"'", """, ";", ":" and "&").
Enter a strong password according to the password strength bar
indication.
For your device own safety, create a strong password of your own choosing. We also
recommend you change your password periodically especially in the high security system.
Step 5 Click Next button.
The Password Protection interface is displayed. See Figure 4-50.
Figure 4-50
Step 6 Set email information.
Input an email address for reset password purpose.
Cancel the box and then click Next or Skip if you do not want to input email information
here.
Step 7 Click Next button.
The Network interface is displayed. See Figure 4-51.
To Next Page
Loading...
Need help?
General
