Local Basic Operation 222
blacklist/whitelist and then trigger the corresponding alarm linkage.
After enable black/whitelist, on the preview interface, the plate in the blacklist is displayed as red
on the plate list, the plate in the whitelist is displayed as green on the plate list. For the plate not
in the black/whitelist, the plate is displayed as white.
Adding B/W List
Step 1 Select Main Menu > AI > DATABASE > B/WLIST.
The B/W List interface is displayed. See Figure 4-161.
Figure 4-161
Step 2 Set plate information and then select Blacklist or Whitelist.
Step 3 Click Add.
Deleting Black/Whitelist
Set type as Whitelist, Blacklist, or All, and then click Search. System displays black/whitelist
information. See Figure 4-162.
On the searched results list, check the box before the plate number and then click Delete,
or click the of the corresponding plate number, you can delete the plate information on
the black/whitelist.
Click Clear to delete all plate information on the black/whitelist.
To Next Page
Loading...
