Local Basic Operation 86
Figure 4-18
Step 2 Click Add Holidays button, the Add Holidays interface is displayed. See Figure 4-19.
Figure 4-19
Step 3 Set holiday name, repeat mode and holiday mode.
Click Add more to add new holiday information.
Step 4 Click Add button, you can add current holiday to the list.
Click the dropdown list of the state; you can enable/disable holiday date.
Click to change the holiday information. Click to delete current date.
Step 5 Click Next button to save settings.
4.1.4.2 Basic Network Settings
To Next Page
Loading...
Need help?
General
