12 • Installing X64 Xcelera-CL PX4 X64 Xcelera-CL PX4 User's Manual
• Install the new board driver. Run Setup.exe if installing manually from a downloaded driver file.
• If the new driver is on a Sapera CD-ROM follow the installation procedure described in
"Installing X64 Xcelera-CL PX4
Hardware and Driver" on page 13.
• Note that you can not install a DALSA board driver without Sapera LT installed on the
computer.
Sapera and Board Driver Upgrades
When both Sapera and the acquisition board driver are upgraded, follow the procedure described below.
• Logon the computer as an administrator or with an account that has administrator privileges.
• From the Windows start menu select Start • Programs • DALSA • X64 Xcelera-CL PX4
Driver • Modify-Repair-Remove.
• Click on Remove to uninstall the board driver.
• From the Windows start menu select Start • Programs • DALSA • Sapera LT • Modify-
Repair-Remove.
• Click on Remove to uninstall Sapera.
• Reboot the computer and logon the computer as an administrator again.
• Install the new versions of Sapera and the board driver as if this was a first time installation. See
"
Sapera LT Library Installation"
on page 12 and "Installing X64 Xcelera-CL PX4 Hardware and
Driver" on page 13 for installation procedures.
Sapera LT Library Installation
Note: to install Sapera LT and the X64 Xcelera-CL PX4 device driver, logon to the workstation as
administrator or with an account that has administrator privileges.
The Sapera LT Development Library (or ‘runtime library’ if application execution without development
is preferred) must be installed before the X64-CL device driver.
• Insert the DALSA Sapera CD-ROM. If AUTORUN is enabled on your computer, the
installation menu is presented.
• If AUTORUN is not enabled, use Windows Explorer and browse to the root directory of the
CD-ROM. Execute launch.exe to start the installation menu and install the required Sapera
components.
• The installation program will prompt you to reboot the computer.
Refer to Sapera LT User’s Manual for additional details about Sapera LT.