X64 Xcelera-CL PX4 User's Manual X64 Xcelera-CL PX4 Overview • 7
About the X64 Xcelera-CL PX4 Frame Grabber
Series Key Features
• Monochrome or RGB Camera Link
• Flat Field Correction
• Bayer Filter Decoding
• Output lookup tables available for each mode
• Vertical Flip supported on board
• RoHS compliant
See “Technical Specifications” on page 79
for detailed information.
User Programmable Configurations
Use the X64 Xcelera-CL PX4 firmware loader function in the DALSA Device manager utility to select
firmware for one of the supported modes. Firmware selection is made either during driver installation or
manually later on (see "
Firmware Update: Manual Mode"
on page 14).
For the X64 Xcelera-CL PX4 Full board the firmware choices are:
• Full Camera Link Input with Flat Field Correction (installation default selection)
Support for one Base or one Medium or one Full Camera Link port. Flat Field Correction (FFC)
includes Fixed Pattern Noise (FPN), Pixel Replacement, Photo Response Non Uniformity (PRNU),
and Shading Correction.
• Base Camera Link Input with Bayer Filter Decoding.
• Camera Link Input with 10 Tap Format 2 support with Flat Field Correction
Supports camera such as the Basler A504. See "
Supporting Non-Standard CameraLink Cameras" on
page
52 for details.
For the X64 Xcelera-CL PX4 Dual board the firmware choices are:
• Dual Base Camera Link Input with Flat Field Correction (installation default selection)
Support for one or two Base Camera Link ports. Flat Field Correction (FFC) includes Fixed Pattern
Noise (FPN), Pixel Replacement, Photo Response Non Uniformity (PRNU), and Shading Correction.
• Dual Base Camera Link Input with Bayer Filter Decoding.
• One Medium Camera Link Input with Flat field correction.
To Next Page
Loading...