MAGFLO
â
4
1.1
Product introduction
1. Product introduction
MAGFLO
â
electromagnetic flowmeters offer reliable, precise and inexpensive flow measure-
ment on all electrically conductive liquids. Typical applications are found in all industries. E.g.:
• Water sector: Potable water, treatment of chemicals, waste water and sludge.
• Food sector: Dairy products, beer, wine, soft-drinks and fruit juices.
• Chemical sector: Detergents, pharmaceuticals, acids and alkalies.
• Other sectors: HVAC, paper pulp and mining slurries.
MAGFLO
â
electromagnetic flowmeters are characterised by simplicity:
Þ Simple to install
Þ Simple to commission
Þ Simple to operate
Þ Simple to maintain
MAGFLO
â
electromagnetic flowmeters are manufactured by Danfoss A/S, Flow Division - one of
the worlds leading makers of flowmeters.
All MAGFLO
â
electromagnetic flowmeters feature a unique SENSORPROM
®
memory unit which
stores sensor calibration data and signal converter settings for the lifetime of the product.
At commissioning the flowmeter commences measurement without any initial programming.
The factory settings matching the sensor are stored
in the SENSORPROM
®
unit. Also customer specified
settings are downloaded to the SENSORPROM
®
unit. Should the signal converter be replaced, the
new converter will upload all previous settings and
resume measurement without any need for re-
programming.
Furthermore, the "fingerprint" used in connection
with the Danfoss Verificator is stored during the sen-
sor calibration.
The Danfoss Verificator can verify the accuracy of
the flowmeter while still installed years after the
initial calibration.
USM II "Plug & Play" add-on communication mo-
dules.
USM II - the Universal Signal Module with "Plug &
Play" simplicity makes it easy to access and
integrate the flow measurement with almost any
system. It ensures the flowmeter will be easy to
upgrade to new communication platforms in the
future, too.
To Next Page
Loading...
Need help?
General
