61
MAGFLO
â
8. Start-up & programming
Start-up & programming
Menu setup
8.4.9
Operator menu setup
The upper line is always active and can never be deselected.
The two lower lines are for individual operator information. Information which the operator can scroll
through with the forward key .
· A closed lock key in the operator menu setup, means that the menu is enabled when viewing
the operator menu.
· An open lock key symbol , means that the menu is not available in the operator menu.
The middle line can either be used as a heading “Text line” for the lower line, or as a flow-reading.
A flow reading can be individually selected for each menu.
The lower line may be used for an additional flow reading to the reading already available in the
upper line.
Text means that the text for the chosen measured value is
shown.
For example if text is chosen in line 2 and flow rate is
chosen in line 3, the text “flow rate” is shown in line 2 and
the measured flow rate value is show in line 3.
To Next Page
Loading...
Need help?
General
