Danfoss MAGFLO MAG 5000 User Manual

MAGFLO
â
83
10. Ordering
10.9
Calibration
Initial calibration
Description
Standard calibration
Each sensor calibrated twice at two
calibration points
Included in sensor scope of delivery
Matched pair
Sensor and signal converter calibrated
together with standard calibration
Customer specified matched pair
Sensor with signal converter calibrated
in max. 10 customer specified points
Accredited Danfoss matched pairs
Calibrations acc. to EN 45001
Sealing and labeling instruction must follow
the order
- PTB cold water
- PTB other media than water
- OIML R75 hot water
- OIML R117 other media than water
- OIML R117 cold water
Accredited Delft matched pair
Calibration acc. to EN 45001
Sealing and labeling instruction as above
Wittness inspection
Any of above mentioned calibrations
Re-calibration
Description Code No. Code No. Code No. Code No.
1
/
4
" - 2
1
/
2
" 3" - 6" 8" - 20" 24" - 48"
Matched pair
Sensor and signal converter calibrated 085F7302 085F7303 085F7304 085F7305
together with standard calibration
Customer specified matched pair
Sensor with signal converter calibrated 085F7377 085F7378 085F7379 085F7380
in max. 10 customer specified points
Accredited Danfoss matched pairs
Calibrations acc. to EN 45001
Sealing and labeling instruction must
follow the order
- PTB cold water 085F7387 085F7388 085F7389 085F7390
- PTB other media than water
- OIML R75 hot water
- OIML R117 other media than water
- OIML R117 cold water
Accredited Delft matched pair
Calibration acc. to EN 45001 N/A 085F7393 085F7394 085F7395
Sealing and labeling instruction as above
Add-on
Code No.: On application form to be filled
in and sent to FD-GB
Ordering

Danfoss MAGFLO MAG 5000 Specifications

General

Brand	Danfoss
Model	MAGFLO MAG 5000
Category	Measuring Instruments
Language	English