Danfoss VLT AQUA Drive FC 202 Programming Guide

3.14.9 15-4* Drive Identication
Parameters containing read-only information about the
hardware and software conguration of the frequency
converter.
15-40 FC Type
Range: Function:
0 N/A* [0 - 0 N/A] View the FC type. The readout is identical
to the power eld of the type code
denition, characters 1–6.
15-41 Power Section
Range: Function:
0 N/A* [0 - 0 N/A] View the FC type. The readout is identical
to the power eld of the type code
denition, characters 7–10.
15-42 Voltage
Range: Function:
0 N/A* [0 - 0 N/A] View the FC type. The readout is identical
to the power eld of the type code
denition, characters 11–12.
15-43 Software Version
Range: Function:
0* [0 - 5 ] View the combined SW version (or package
version) consisting of power SW and control SW.
15-44 Ordered Typecode String
Range: Function:
0* [0 - 40 ] View the type code string used for reordering the
frequency converter in its original conguration.
15-45 Actual Typecode String
Range: Function:
0* [0 - 40 ] View the actual type code string.
15-46 Frequency Converter Ordering No
Range: Function:
0* [0 - 8 ] View the 8-digit ordering number used for
reordering the frequency converter in its original
conguration. To restore the ordering number after
the power card exchange, see
parameter 14-29 Service Code.
15-47 Power Card Ordering No
Range: Function:
0* [0 - 8 ] View the power card ordering number.
15-48 LCP Id No
Range: Function:
0* [0 - 20 ] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0* [0 - 20 ] View the control card software version number.
15-50 SW ID Power Card
Range: Function:
0* [0 - 20 ] View the power card software version number.
15-51 Frequency Converter Serial Number
Range: Function:
0* [0 - 10 ] View the frequency converter serial number.
15-53 Power Card Serial Number
Range: Function:
0* [0 - 19 ] View the power card serial number.
15-54 Cong File Name
Array [5]
Range: Function:
Size related* [0 - 16 ] Shows the special conguration
lenames.
15-58 SmartStart Filename
Range: Function:
Size related* [0 - 20 ] Shows the SmartStart lename.
15-59 Filename
Range: Function:
Size related* [0 - 16 ] Shows the currently used CSIV
(costumer-specic initial values)
lename.
3.14.10 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software conguration of the options
installed in slots A, B, C0, and C1.
15-60 Option Mounted
Array [8]
Range: Function:
0* [0 - 30 ] Shows the type of the installed option.
15-61 Option SW Version
Array [8]
Range: Function:
0* [0 - 20 ] View the installed option software version.
Parameter Description Programming Guide
MG20OB02 Danfoss A/S © 05/2018 All rights reserved. 147
3 3

Danfoss VLT AQUA Drive FC 202 Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive FC 202
Category	DC Drives
Language	English