Danfoss VLT AQUA Drive FC 202

23-01 ON Action
Array [10]
Option: Function:
[24] Stop
[26] DC Brake
[27] Coast
[28] Freeze output
[29] Start timer 0
[30] Start timer 1
[31] Start timer 2
[32] Set digital out A low
[33] Set digital out B low
[34] Set digital out C low
[35] Set digital out D low
[36] Set digital out E low
[37] Set digital out F low
[38] Set digital out A high
[39] Set digital out B high
[40] Set digital out C high
[41] Set digital out D high
[42] Set digital out E high
[43] Set digital out F high
[60] Reset Counter A
[61] Reset Counter B
[62] Counter A (up)
[63] Counter A (down)
[64] Counter B (up)
[65] Counter B (down)
[70] Start Timer 3
[71] Start Timer 4
[72] Start Timer 5
[73] Start Timer 6
[74] Start Timer 7
[80] Sleep Mode
[81] Derag
[82] Reset Derag Counter
[90] Set ECB Bypass Mode
[91] Set ECB Drive Mode
[100] Reset Alarms
[101] Reset Flow Totalized Volume
Counter
[102] Reset Flow Actual Volume Counter
23-02 OFF Time
Array [10]
Range: Function:
Size
related*
[ 0 - 0 ] Sets the OFF time for the timed action.
NOTICE
The frequency converter has no
back-up of the clock function. The
set date/time is reset to default
(2000-01-01 00:00) after a power-
down unless a real-time clock
module with back-up is installed. In
parameter 0-79 Clock Fault, it is
possible to program a warning if
the clock has not been set properly,
for example after a power-down.
23-03 OFF Action
Array [10]
See parameter 23-01 ON Action for available actions.
Option: Function:
[0] * Disabled
Parameter Description
VLT
®
AQUA Drive FC 202
192 Danfoss A/S © 05/2018 All rights reserved. MG20OB02
33