DANIEL 2500 User Manual

MODELMODEL 2500_______________________________________________________2500_______________________________________________________
Press the ENTER key to access the first selection, STARTUP, on the
CALCULATIONS menu and display the following screen.
CALCULATIONS
STARTUP
_________________________________________________________
NOTE! The MODEL 2500 displays only those calculation
variables that have been assigned engineering units.
Variables with no assigned engineering units are
not displayed.
_________________________________________________________
Press the DOWN arrow key to access the second selection, OPERATOR, on
the CALCULATIONS menu and display the following screen.
CALCULATIONS
OPERATOR
Press the DOWN arrow key to scroll down the CALCULATIONS menu
until accessing the following illustrated display screen showing TOTALS,
which is the selection that contains the calculated variable, CURSCF.
CALCULATIONS
TOTALS
________________________________________________________________________________________________________________________________________
SECTIONSECTION 66
101

DANIEL 2500 Specifications

General

Brand	DANIEL
Model	2500
Category	Computer Hardware
Language	English