MODELMODEL 2500_______________________________________________________2500_______________________________________________________
GLOSSARY OF STANDARD SELECTION LIST OPERATOR ENTRIES
ENTRY
EXPLANATION
-A-
ACFSCALE ACFSCALE provides for selecting the units scaling factor
for a volume in actual cubic feet (ACF). Selections
indicate the scale by which the volume in ACF is
divided. In other words, selecting X10 divides the volume
in ACF by 10; selecting X100 divides the volume by
100: selecting X1000 divides the volume by 1000, etc.
-B-
BATCH BATCH provides for selecting a batch change. The
selections are CHANGE, which causes a batch change,
and IDLE, which does not cause a batch change.
BTUSCALE BTUSCALE provides for selecting the scaling factor for
energy in British thermal units (BTU). Selections indicate
the scale by which the energy in BTU is divided. In other
words, selecting X10 divides the energy in BTU by 10;
selecting X100 divides the energy in BTU by 100;
selecting X1000 divides the energy in BTU by 1000, etc.
________________________________________________________________________________________________________________________________________
APPENDIXAPPENDIX CC
139
To Next Page
Loading...
Need help?
General