____________________________________________________________________________________________________________ MODELMODEL 25002500
OPERATOR COMMAND REPORTS
An operator can print a report manually at the front panel of the MODEL 2500 by
performing the following procedure.
- Begin with the MAIN MENU
- Locate and display the sub-menu REPORTS using the arrow keys
- Press the ENTER key
- Locate and display the report name (for example, AMREPORT) by
using the arrow keys
- Press the ENTER key
At this point, the report should be printed out on the line printer.
________________________________________________________________________________________________________________________________________
SECTIONSECTION 77
122
To Next Page
Loading...
Need help?
General